Unlock EC168 Huawei 3G CMDA EVDO Modem Dongle Free – Today, I am writing article to Unlock EC168 Huawei 3G CMDA EVDO Modem Dongle  Various network providers provided CDMA 3G Modem Dongle to his users. Unlocking CDMA modem is difficult that GSM 3G / 4G modems. I have found some ways through which you can Unlock EC168 Huawei 3G CMDA EVDO Modem Dongle for free. Interest users who have CDMA dongle can now contact me, i will suggest some another steps which is not mentioned in the article. The below provided solution will unlock fully your EC168 3G Huawei CMDA EVDO Modem Dongle. If you are interested then you can try it out.

Step by step guide to Unlock EC168 Huawei 3G CMDA EVDO Modem Dongle Free :

 

1. Download the EC168 modem dongle firmware which download link is provided at the end of the article.
 
2. Now unzip and run the firmware update file.

CDMA modem - firmware update
CDMA modem – firmware update
3. Accept the agreement and click on Next button to proceed.
 
4. On the following window put a check on Auto remove the device after update and click Next.
Auto remove after update
Auto remove after update
5. Read warning message and click on Start button. 
 
6. Now it will ask you for a password.
Firmware Update Password
Firmware Update Password
7. Put the password of your MEID. (To get the firmware code of your MEID comment your MEID).
 
8. Follow follow the online screen till finish button.
Firmware Update Finish
9. Now you have successfully finished firmware update of your CDMA EVDO EC168 modem / dongle.
 
10. Now download the CDMA workshop tool 2.7 Pre-cracked version from the download link which is provided at the end of the article.
 
11. Now extract in a folder and run it.
 
12. Now in the COM port drop down list select the com port to which you have connected the EC168 modem. (To get the COM Port read this article.)
Main tab - COM port
Main tab – COM port
13. Now after detecting the COM port click on Connect and your EC168 3G Huawei CMDA EVDO Modem Dongle will be connect to the CDMA Workshop 2.7.0 tool.
 
14. After the EC168 modem is connected select go to the security tab and click Read button.
CDMA workshop - security tab
CDMA workshop – security tab
15. When SPC code will be available in the box then click on SPC button. 
 
16. Now you will get two option Send and Write as in below screenshot. Click on Send button and you will get a message spc accepted.
Send SPC code
Send SPC code
17. Now select the Other tab and in the RUIM – select RUIM if available or to RUIM only and click on the write button.  Now you have successfully unlocked your EC168 3G Huawei CMDA EVDO Modem Dongle. 
CDMA modem RUIM options
CDMA modem RUIM options
Note : Now you can use both CDMA inbuilt and CDMA service of another network provider in your modem. If you select RUIM-only then the default CDMA service will not work and if you select RUIM if available then you can use CDMA inbuilt service without the sim and CDMA service of another network provider when you insert the sim into the EC168 3G Huawei CMDA EVDO Modem Dongle.
 
Users are requested to share the successful story to help each other.
Hope you have unlocked your EC168 3G Huawei CMDA EVDO Modem Dongle successfully, then like my Facebook Page.
 
Now download the latest Unbranded Huawei Mobile Partner Software from this link to use another network provider sim on your unlocked EC168 CDMA modem.
 

Download EC168 3G Huawei CMDA EVDO Modem Dongle Firmware
Download CDMA Workshop Tool 2.7 Cracked Version

Leave a Reply