Today, I am writing an article to Unlock EC1260 Huawei 3G CMDA EVDO Modem Dongle Various network providers provided CDMA 3G Modem Dongle to their users. Unlocking the CDMA modem is difficult than GSM 3G / 4G modems. I have found some ways to Unlock EC1260 Huawei 3G CMDA EVDO Modem Dongle for free. Interest users who have CDMA dongle can now contact me, and I will suggest some other steps which are not mentioned in the article. The below-provided solution will unlock your EC1260 3G Huawei CMDA EVDO Modem Dongle fully. If you are interested, then you can try it out.
Step by step guide to Unlock EC1260 Huawei 3G CMDA EVDO Modem Dongle Free:
1. Download the EC1260 modem dongle firmware, which download link is provided at the end of the article.
2. Now, unzip and run the firmware update file.
3. Accept the agreement and click on the Next button to proceed.
4. On the following window, put a check on ‘Auto remove the device after update’ and click Next.
5. Read the warning message and click on the Start button.
6. Now, it will ask you for a password.
7. Put the password of your MEID. (To get the firmware code of your MEID, comment your MEID).
8. Follow the online screen till the finish button.
9. Now, you have successfully finished the firmware update of your CDMA EVDO EC1260 modem/dongle.
10. Now download the CDMA workshop tool 2.7 Pre-cracked version from the download link provided at the end of the article.
11. Now extract to a folder and run it.
12. Now, in the COM port drop-down list, select the COM port to which you have connected the EC1260 modem (To get the COM Port read this article.)
13. Now, after detecting the COM port, click on Connect, and your EC1260 3G Huawei CMDA EVDO Modem Dongle will be connected to the CDMA Workshop 2.7.0 tool.
14. After the EC1260 modem is connected, select the security tab and click the Read button.
15. When the SPC code is available in the box, click on the SPC button.
16. Now, you will get two options, Send and Write, as in the below screenshot. Click on the Send button, and you will get a message SPC accepted.
17. Now select the Other tab, and in the RUIM – select RUIM if available or to RUIM only and click on the write button. Now you have successfully unlocked your EC1260 3G Huawei CMDA EVDO Modem Dongle.
Note: Now, you can use both the CDMA inbuilt and CDMA service of another network provider in your modem. If you select RUIM-only, then the default CDMA service will not work. If you select RUIM if available, then you can use the CDMA inbuilt service without the SIM card and CDMA service of another network provider when you insert the SIM into the EC1260 3G Huawei CMDA EVDO Modem Dongle.
Users are requested to share the success story to help each other.
I hope you have unlocked your EC1260 3G Huawei CMDA EVDO Modem Dongle successfully, then like my Facebook Page.
Now download the latest Unbranded Huawei Mobile Partner Software from this link to use another network provider SIM on your unlocked EC1260 CDMA modem.
Download EC1260 3G Huawei CMDA EVDO Modem Firmware
Download CDMA Workshop Tool 2.7 Cracked Version
