Download Firmware Huawei E5377TS-32 21.292.99.08.00 (Universal)
Download Firmware Huawei E5377TS-32 21.292.99.08.00 (Universal)
E5377TS-32_Firmware_21.292.99.08.00_Sauid-Arabia.zip
56.9 MiB
1028 Downloads
Details

Download Firmware Huawei E5377TS-32 21.292.99.08.00 (Universal)

Languages:English
Author:Kamlesh Kumar
Platforms:Windows 8
Category:Huawei
License:Freeware
Date:April 3, 2016

Disclaimer : Administration of routerunlock shall not be liable in case of unknowing change of the firmware of your modem / router / MiFi. Moreover, if you want any specific firmware of related to Huawei dongle / Pocket MiFi, then leave a comment, if it will be available then will be published. All the firmware which are posted at routerunlock, are free of cost and there is no need to pay anyone.

Huawei E5377

37 COMMENTS

  1. hello please help. i’m stuck in FTM after flashing this firmware on my e5377ts-32 mobile wifi . please help . how do i exit that mode

  2. Hello Sir please i also have the same problem i’m stuck in FTM after flashing this firmware on my e5377ts-32 mobile wifi , Please how do i get the firmware which ends with 00.00? if you have please post. Thank you.

  3. I’m stuck too. Flashing program can’t find port with modem connected. In device manager i can see 3 huaweii modem with no drivers installed. installing drivers from Microsoft doesn’t work either. Any ideas?

  4. That Firmware Huawei E5377TS-32 21.292.99.08.00 (Universal) not work only stay FTM in screen Huawei E5377TS i need Firmware Huawei E5377TS

  5. Sir I need your Help when i got my device E53377s-32 and unlock with buy a code.
    Device name : E5377s-32
    Firmware : 21.305.09.00.401
    IMEI : 865076021194752
    Can not update device Firmware :21.292.99.08

  6. we have 21.295.03.02.55 firmware for imei 865076024101093
    the unit says NO SERvice but it seems it is unlocked based on dcunlocker software.

    what can we do for the router to get network again?

  7. what does “No service” mean? what do i need to do to get network again on this unit? when i insert a sim card the unit is able to read the sim card as it shows the apn needed by the isp.

  8. nothing done in the past, this is from our customer. is there a universal firmware thats easier to use? when i run the firmware it seems to disconnect the port of the e5377t and later on will say device not found. please help.

LEAVE A REPLY

Please enter your comment!
Please enter your name here