Factory unlock code of ZTE MF283 is now available at routerunlock.com. If your device asks for unlock code after changing the SIM card, it can be unlocked easily. Once the router is unlocked, you can easily use the default and other network carrier SIM cards.
The ZTE MF283 is a 4G LTE gateway that supports multi-mode networks. It supports TDD and FDD networks simultaneously. The MF283 is a category 3 4G router that downloads a file with speed up to 100Mbps and uploads speed up to 50Mbps. Under FDD networks, downlink speed could reach up to 68Mbps and uplink to 17Mbps for TDD mode.
The ZTE MF283 is an Indoor CPE/LTE router that supports TD-LTE Band 38(40), FDD LTE Band 1,2,4(3),5,7,8,12(13,17,20), and DC-HSPA+ 850/900/1700/1900/2100MHz. It features Wi-fi: 802.11 b/g/n and speeds up to 300Mbps. It can provide the internet up to 32 wireless users simultaneously.
It has PSTN & VOIP voice support. It supports WebUI as well as a ZTE Wi-Fi monitor. There is four RJ 45 connector, and two RJ11 jack along with one USB port are available. It measures 195 mm x 150 mm x 55 mm. It can be operated on Windows 7, Windows XP, Windows Vista, and Linux operating systems. It costs in the market around 350USD.
ZTE MF283 is currently available in Spain by TME and in Russia by MTS (834F) carrier. Now our team can provide the factory unlock code MF283 too. If you have purchased a device that is locked to a particular network, then you can not use it with another SIM card. Hence, to use a SIM card, you need to unlock it.
How long we need to wait for an unlock code of ZTE?
The approximate delivery time for an unlock code of ZTE starts from 1 hr to 24 hrs.
The average response time is 2 hrs (Based on last 100 orders).
How to Unlock ZTE MF283 Router?
1. Switch off the ZTE MF283 WiFi router.
2. Change the SIM card with any other operator.
3. Connect to the PC with a USB cable.
4. Browse its default IP address (192.168.x.x).
Note: If the device cannot browse the default page of the router, open My Computer >> Virtual CD-ROM, and install it on PC.
5. Log in to the device with admin privilege.
6. On the Home page, click Unlock Device.
7. Enter the unlock code and click OK.
Once the code is accepted, the device will be unlocked permanently. Create a new profile according to the new SIM card and connect to the internet.
Note II: NCK / SIMlock / Unlock code of ZTE MF283 is not free.
