WOM Chile has recently launched a new Huawei’s Mobile WiFi router, the E5573s-508 (Huawei E5573). It comes with customized firmware and has to change the firmware for unlocking. It runs on the firmware version You can also check the firmware version of your device.

WOM Chile Huawei E5573s-508 mobile WiFi router can be unlocked after the firmware upgrade.

Before proceeding with the firmware upgrade, download the following required files:

1. Firmware Huawei E5573s-508 and Huawei E5573s-156 Firmware

2. Huawei mobile partner.

3. Firmware code you can generate from Universal Master Code tool or comment with the model and IMEI.

How to Unlock Customized WOM Huawei E5573s-508 Mobile WiFi Router?

1. Connect your Huawei E5573s-508 router to PC or laptop via USB cable.

2. Make sure that your router is charged at least 50%.

3. Run the firmware file of Huawei E5573s-508

Note: If you are getting “Error 10: Find port failed” then refer this post to rectify the problem. If your PC is not available under COM ports then run this registry file and restart your computer.

4. It will ask a password. Use flash or firmware code as password.

5. Input the correct firmware code and wait until finish process.

6. After successful flashing of the device, switch off the router or remove the battery and re-insert battery in the device and turn it ON.

7. If it is not detected by PC due to drivers problem then update the drivers (You have already downloaded Huawei Mobile Partner).

8. Now, download DC unlocker.

9. Detect the device under DC unlocker.

10. Go to the end of the result.

11. Now type “AT^NVRDEX=50503,0,128” (without quotes) and press Enter from the keyboard.

DC with commands

12. Now, it will show NV codes in hash format. Pay 6 USD through PayPal and mention the details, out team member will convert hashcode into the unlock code / NCK and will be emailed back to you.

Note: After getting the code through email, proceed with further steps.

13. Now, run the firmware of Huawei E5573s-156

Note: During this period, it will not ask the password.

14. Wait till firmware successfully installs in the device.

15. You will notice that all lights are turned ON, including battery light and network light.

16. Open web-browser (Internet Explorer) in PC and browse for

17. Login to device router panel (username and password are admin).

18. Here, you will see, your device have 10 unlocking attempts left.

19. Just enter correct unlock code and your router will be unlocked.

20. Now create a new profile according to the new SIM card.

Note: Don’t try to enter any wrong/free unlock code into the router, otherwise it will be locked permanently.

Share your thoughts here!