Today, I am writing article to Unlock Reliance EC150 Huawei 3G CMDA EVDO Modem Dongle Various network providers provided CDMA 3G Modem Dongle to his users. Unlocking CDMA modem is difficult that GSM 3G / 4G modems. I have found some ways through which you can Unlock Reliance EC150 Huawei 3G CMDA EVDO Modem Dongle for free. Interest users who have CDMA dongle can now contact me, i will suggest some another steps which is not mentioned in the article. The below provided solution will unlock fully your EC150 3G Huawei CMDA EVDO Modem Dongle. If you are interested then you can try it out.

How to Unlock Reliance EC150 Huawei 3G CMDA EVDO Modem Dongle Free :

1. Download the Reliance EC150 modem dongle firmware which download link is provided at the end of the article.

2. Now unzip and run the firmware update file.

Firmware Update wizard
Firmware Update wizard
3. Accept the agreement and click on Next button to proceed.
4. On the following window put a check on Auto remove the device after update and click Next.
Firmware Update - Auto remove
Firmware Update – Auto remove
5. Read warning message and click on Start button.
6. Now it will ask you for a password.
Firmware Update Code
Firmware Update Code
7. Put the password of your MEID. (To get the firmware code of your MEID comment your MEID).
8. Follow follow the online screen till finish button.
Firmware Update Finish
Firmware Update Finish
9. Now you have successfully finished firmware update of your Reliance CDMA EVDO EC150 modem / dongle.
10. Now download the CDMA workshop tool 2.7 Pre-cracked version from the download link which is provided at the end of the article.
11. Now extract in a folder and run it.
12. Now in the COM port drop down list select the com port to which you have connected the Reliance EC150 modem. (To get the COM Port read this article.)
CDMA workshop tool - COM selection
CDMA workshop tool – COM selection
13. Now after detecting the COM port click on Connect and your Reliance EC150 3G Huawei CMDA EVDO Modem Dongle will be connect to the CDMA Workshop 2.7.0 tool.
14. After the Reliance EC150 modem is connected select got to the security tab and click Read button.
COM Port - Read
COM Port – Read
15. When SPC code will be available in the box then click on SPC button.
16. Now you will get two option Send and Write as in below screenshot. Click on Send button and you will get a message spc accepted.
SPC Code - Send
SPC Code – Send
17. Now select the Other tab and in the RUIM – select RUIM if available or to RUIM only and click on the write button.  Now you have successfully unlocked your Reliance EC150 3G Huawei CMDA EVDO Modem Dongle.
CDMA - RUIM Setting
CDMA – RUIM Setting
Note : Now you can use both CDMA inbuilt sim and another network provider  CDMA sim facility in your modem. If you select RUIM-only then the default CDMA service will not work and if you select RUIM if available then you can use default CDMA service without the sim and another network provider CDMA  service when you insert the sim into the Reliance EC150 3G Huawei CMDA EVDO Modem Dongle.
Now download the latest Unbranded Huawei Mobile Partner Software from this link to use another network provider sim on your unlocked Reliance EC150 CDMA modem.

Update : While flashing the firmware of CDMA Reliance modem, it asks for SPC code not for firmware code. For getting SPC code refer this article.

686 COMMENTS

  1. I have a reliance netconnect data card but i dont know the number, Can we know the number so that i can recharge and activate internet?
    Its a ZTE modem and MEID is: A000001F9C2343

  2. Dear Kamlesh i have done everything successfully but when i plugged the device in my computer so Reliance dashboard is as it is.. So can i use CDMA sim in this device they will work? If no so what can i do?

  3. Bro i used BSNL CDMA sim but unfortunately signal is not coming and giving msg is “The remote computer did not respond”. See in this pic….Help me what should I do?

  4. Dear sir ,some one has unlocked my huawei ec150 reliance netconnect plus
    dongle(newer)..he has successfully update this firmware but when i
    tried then i got => firmware version failure and password failure
    error…
    As i knw this process is not 100% correct…i have tried
    with different 3 to 4 modems same error i got …but other person has
    unlocked it…pls tell me the exact solution..
    ec122 firmware ask for pwd => i hv used spc n firmware code both bt got error..as i hv explained …reply me fast.

    • Reliance EC150 and EC156, both models two variant firmwares are available in market. One is unlock-able through my firmware, which is provided in the article, and another one is not unlockable. That’s why some users tells that he unlocked successfully and some like you (unlucky person) says that it did not work. Unlocking of CDMA modems are only game of correct firmware. I have only one which I have posted in the article.

  5. sir, i cant update the firmware version.its asked only the spc code and i got it and put it but after that the software didn’t installed because of version check. how can i solve this problem please help me. thanks.

  6. Dear Sir,

    i tried to unlock my reliance data card and i found your website.

    it explains everything very clearly. thank you very much. but i faced

    different problem.so if you can please help me sir.

    MEID: A000002D42F7E0 and

    SPC: 073388

    installed version: 11.104.04.00.114. and target version is

    11.104.04.00.000 lower so i cant update the firmware. without it i

    cant unlock it. can you help me to deal with this problem. i tried to

    install the same version again and then do the unlocking version,

    that’s too not working. please give a suitable solution. thanks.

  7. there’s no meid on my datacard, when I use meid of my ruim, I can’t flash firmware using unlock code from meid.
    really confusing.
    need help.
    thanks

  8. Hi Kamlesh ,

    7. Put the password of your MEID. (To get the firmware code of your MEID comment your MEID).

    Please help me with the password of my MEID A000002D42FE64

    THANKS !!

  9. Hi Kamalesh Sir, First of thanks for the article. Please help me my MEID is — A000002DR38953,
    A000002DB38953, the letter after D is not properly visible kindly help.

  10. Error while connecting :Failed to connect because the modem on the remote computer is out of order. Followed all the previous steps. Selected RUIM if avail. (using vodafone gsm sim after unlocking process and theres no network showin in the dashboard.) Any help?
    Thanks

  11. Dear kamlesh, first of all thank you very much for all your help. Highly appreciated. I have huawei EC315 (tata photon max wifi), my MEID is A0000049B1421C, kindly provide me firmware updater code.

  12. Dear Kamlesh,
    Thank you for such a descriptive post. I am using Huawei EC150 model and the MEID: A000002DB5E700. Could you please help me with Firmware update code please.
    Thanks,
    Udhaya

  13. Hello Kamlesh,

    Please guide me to use EC 150 device.

    Which is not connectred. Network are getting of reliance CDMA.

    But it was not connected.

    Please help me.

  14. sir, am deated this device (Huawei EC150 – Reliance netconect) befor 2 years.
    now am pluged this device on my windows 7 (home basic) is show error: 678
    how can i reactivate or unlock this device.
    please help me sir, MEID:A000006280762
    email: appubaby9@gmail.com

  15. Hi Sir,
    I have bought Reliance NetConnect+Huawei Mobile broadband. I have followed the steps you have mentioned above. Could you please help me to get the firmware updater code. Please find the details below.
    Model: HUAWEI EC150
    MEID: A000002DB5E700

    Thanks,
    Udhaya

  16. Sir,
    I have A Reliance NetConnect+Huawei Mobile broadband DATA CARD. I have followed the steps you have mentioned above. Could you please help me to get the firmware updater code. Please find the details below.
    Model: HUAWEI EC150
    MEID: A000002DD9615F

  17. I did everything. Changed to RUIM only. Everything is successful. But when I restart the modem it again shows NV only. Can u plz tell me why this is happening.

  18. i have spc code 113468 my firmware version is 11.104.04.00.114 your firmware version is 11.104.04.00.000 while updating it gives an error The version check fail upadte wizard can’t work on

  19. Hello, I tried updating the firmware, I followed all the steps and I put in SPC code too, after that some error came and it closed down. I again started the update software and now it says ” Different C version, update is forbidden ”

    Kindly tell me what should I do ?

LEAVE A REPLY