Today, I am writing article to unlock EC1561 Huawei CMDA EVDO Modem.  Various network providers provided CDMA 3G Modem Dongle to his users. Unlocking CDMA modem is difficult than GSM 3G / 4G modems / routers. I have found some ways through which you can unlock EC1561 Huawei CMDA EVDO Modem Dongle. Interest users who have CDMA dongle can now contact me or can comment in comment box if any problem in unlocking his EC1561 Modem. The below provided solution will unlock fully your EC1561  Huawei CMDA EVDO Dongle. If you are interested then you can try it out.

How to unlock EC1561 Huawei CMDA EVDO Modem Dongle Free :

1. Download the EC1561 Huawei CMDA EVDO Modem Dongle firmware which download link is provided at the end of the article.

2. Now unzip and run the firmware update file.

Firmware update - EC1561 modem
3. Accept the agreement and click on Next button to proceed.

4. On the following window put a check on Auto remove the device after update and click Next

EC1261 CDMA modem dongle firmware update

5. Read warning message and click on Start button.

6. Now it will ask you for a password.
EC1261 CDMA modem dongle firmware update
EC1261 CDMA modem dongle firmware update
7. Put the password of your MEID. (To get the firmware code of your MEID comment your MEID).

8. Follow follow the online screen till finish button.

EC1261 CDMA modem dongle firmware update - finish

9. Now you have successfully finished firmware update of your EC1561 Huawei CMDA EVDO Modem Dongle.

10. Now download the CDMA workshop tool 2.7 Pre-cracked version from the download link which is provided at the end of the article.

11. Now extract in a folder and run it.

12. Now in the COM port drop down list select the com port to which you have connected the EC1561 Huawei CMDA EVDO Modem. (To get the COM Port read this article.)

CDMA Workshop Tool main tab - COM Port

13. Now after detecting the COM port click on Connect and your EC1561 Huawei CMDA EVDO Dongle will be connect to the CDMA Workshop 2.7.0 tool.

14. After the EC1561 Huawei CMDA EVDO Modem Dongle is connected select got to the security tab and click Read button.

read flash in CDMA workshop tool

15. When SPC code will be available in the box then click on SPC button.

16. Now you will get two option Send and Write as in below screenshot. Click on Send button and you will get a message spc accepted.

Send SPC as Default in cdma workshop

17. Now select the Other tab and in the RUIM – select RUIM if availabe or to ruim only and click on the write button.  Now you have successfully unlocked your EC1561 Huawei CMDA EVDO Modem.

CDMA modem unlock RUIM options

Note : Now you can use both CDMA inbuilt and CDMA of another network provider facility in your EC1561 Huawei CMDA EVDO Modem.  If you select RUIM-only then the default CDMA service will not work and if you select RUIM if available then you can use CDMA service without the sim and CDMA of another network provider when you insert the sim into the  EC1561 Huawei CMDA EVDO Modem.
Now download the latest Unbranded Huawei Mobile Partner Software from this link to use another network provider sim on your unlocked EC122 CDMA modem.

Hope you have unlocked your EC1561 Huawei CMDA EVDO Modem successfully, then like my Facebook Page.

Download  EC1561  Huawei CMDA EVDO Modem Dongle Firmware

(Firmware update for Huawei EC156 also suits for EC1561 CDMA modem)

Download CDMA Workshop Tool 2.7 Cracked Version


  1. hi, i have mts modem model no. ec1561 i want to unlock my modem.
    but problem is that this is a cdma modem and there is no space for inserting cdma sim,
    since i had open the modem twice. so i want to ask u after unlocking my modem how i’m enable to use the other
    cdma services without inserting the sim as i already mention that there is no slot for inserting sim.
    if there is any chance so please clear me.
    my meid: A000003E3BF109
    FCC id: QISEC1561
    please tell me the firmware update password.

  2. 1 Breaking News!Breaking News!

    Get free dc unlocker’s 4 free credits.Just like their fb page & at the left end there will be an app to get free credits which is only for a limited time offer.Hurry!Try it only on fast connection to get it asap & use laptop!

    FB Page:

  3. When DC unlocker claims that a particular model is unlockable,then it’s true for real,I swear that I really did unlocked my MTS Huawei EC1561 with the help of DC Unlocker.I also have got my friends free credits & I tried the same with EC315,but it just couldn’t unlock it.EC315 reverts back to NV Mode only.Anyway I atleast have unlocked my EC1561.My heartful thanks to Dc unlocker!

  4. Kamlesh Sir,pls I want APN SETTINGS for Bsnl Evdo with Access point name.I am
    going to check my mts unlocked EC 1561 with the help of my friend’s
    relative’s Bsnl evdo sim on coming monday.

      • Step 1: First Pls,go to
        And first like their page,so at the left side of the page in middle click on get free credits app with star golden symbol & follow the upcoming steps.
        1)When you click on that free credits app with star golden symbol then with facebook symbol free credits will appear.
        2)Then click on that facebook symbol free credits,after that it will ask for confirmation as ok or cancel,so press ok & continue.
        3)Then,wait it will ask you to create a username,so create a username & see if it accepts & if it accepts it then a ok button will appear.just below it.Then,click on ok!
        4)A message will appear as password is sent to your facebook email id address.
        5)So,now login in to the email account which you use it for logging in with facebook,account.Then,in mail go to spam & you will see a message from dc unlocker with the password.Normally it would cost you 400Rs for getting those 4 credits,but dc unlocker is giving those 4 credits as a give away in fb for promotion!

      • CAUTION: Pls don’t blame or abuse me if something goes wrong.Mostly,it won’t happen if you follow the steps clearly as being instructed.So,do it at your own risk!

        First of all before all this comment here your MEID in & Kamelsh Sir will provide you Firmware update code & also the dashboard update code,but ony sometimes Cdma dongles will ask for dashboard update code,but for sure they will ask Firmware update code!

        Step 2: Then go to & download that 21.3 MB Dashboard file.

        Step 3: Then download DC-Unlocker – Huawei CDMA Modems Unlocker client v.1.0033 from

        Step 4: Read this instructions/tutorial on EC1561 unlocking from ,but pls don’t proceed.Just read it.

        Step 5:Extra Internet other than the Mts EC1561 should be connected.I my case I have connected extra 3g Internet from ovi suite using my Nokia 5230 phone with the help of usb cable!

        Step 5: Important Don’t connect other dongles expect one dongle at a time i.e EC1561 only & also the extra internet should be connected like wifi or ovi suite 3g internet.

        Step 6: Pls be sure that default MTS EC1561 software is preinstalled in your laptop successfully without any errors,if not sort it out & reinstall it.

        Step 7: Now,remove your EC1561 from your laptop!

        Step 8:Now,pls be sure that you have connected that extra internet from wifi or using like what I have said in step 5!

        Step 9: Now Run the downloaded DC-Unlocker – Huawei CDMA Modems Unlocker client as administrator in your laptop.

        Step 10: Open User Account data tab, enter your username and password that you received after credits purchase. Click “Check account status”.

        Step 11: Now,Navigate to Help tab and click Access support area,You should be redirected to support area website!

        Step 12: Type “ec156” in search field and hit enter!

        Step 13: Select “EC156_Firmware_TCPUR001B106D00SP06C000(Normal).zip” then click on download button,for your reference if you are confused have a look at the tutorial as what I had mentioned in Step 4!

        Step 14:Now extract it and keep the extracted two files in a single folder along with the .bin file!

        Step 15: Now,close DC-Unlocker – Huawei CDMA Modems Unlocker & then disconnect from the extra internet & also remove the extra usb cables if used for extra internet connection.

        Step 16: Now reconnect your dongle & close the default opening mts dashboard.But,be sure that there is no cdma sim inserted inside the dongle,then read Step 21 before proceeding next step!

        Step 17: Run the downloaded file and update the firmware of your EC156 Data card EC156Update_11., by putting a check mark on I accept the agreement and clicking Next button.

        Step 18: On the following window put a check on Auto remove the device after update and click Next!

        Step 19: Read Warning message on the next window and pay attention to things you should be aware during update. Then click Start button.

        Step 20: After you click Start button, other window should appear where you need to enter password to proceed with the update.Enter the firmware update code provided by the Kamlesh sir & wait for it to complete.During flashing sometimes default MTS Dashboard sofware will open automatically,if it does close that default MTS Dashboard sofware & leave it & wait for successfull completion of flashing.After successfull completion,click finish!

        Step 21: If in any case it didn’t start to update the firmware or struck inbetween,then pls don’t panic.Wait until it displays some error message.Normally it would take 1 hour to display that error message or in your case it may take extra.Don’t unplug your dongle until you get that error message.If at all if you unplug your dongle in the middle of the update process or your laptop switched off because of power shortage in between the process then for sure I can say your dongle will not work again.So,please follow it strictly!

        Step 22: If step 22 errors occurs,then the latest Huawei drivers from

        And,then again repeat the steps from Step 16 to Step 20,you will for sure now be successfull!

        Step 23: Now after successfull firmware flashing you should now Flash your dashboard also which you downloaded in step 2.Kindly do it & in rare cases only it will ask for Dashboard update code.

        Step 24:Now after successfull firmware & dashboard update,kindly unplug the EC1561 from the laptop.

        Step 25: Now manually remove/uninstall the default mts software from your system/laptop!

        Step 26: Now again recconect EC1561 & install the Huawei modem 3.5 software.

        Step 27: Now close the default opening Huawei modem 3.5 sofware before proceeding next step.

        Step 28: Again now follow steps from step 8 to step 10!

        Step 29: After logging in to the Dc unlocker server,you can see that 4 credits are in your account/server!

        For pics again refer to tutorial from

        Step 30: Now proceed to Modems tab & Select EC156 from the list!

        Step 31:And then click Detect device!

        Step 32: Wait till DC-Unlocker Huawei CDMA Modems Unlocker software fully detects device!

        Step 33: Open Unlock tab and click Unlock button, wait till you see message that modem is unlocked.

        a)Ruim preffered means Default Mts & also the Network of the cdma sim which you are inserting will also work!

        b)Ruim Only means only the Network of the other cdma sim which you are inserting will work!

        c)NV only: Again wantedly locking your device & if you do so only Default Mts network will work!

        Above mentioned a,b & c can choosed by you according to your own preferences.But,personally I will prefer option (a) as my Ruim settings!

        Not to worry these Ruim settings can be chaged infinity number of times,because DC-Unlocker – Huawei CDMA Modems Unlocker client is programmed in a way that 4 credits can be used for 1 dongle & whereas the unlock attempts for that single dongle is infinity!

        Only Cdma sims will work after unlocking EC1561.But,I am still yet to check,whether cdma network of other operators is working in my dongle.I currently have no cdma sim to check.I highly doubt that Bsnl evdo sim will work,because I have heared some where that after unlocking EC1561 only Bsnl evdo sim will work on only Bsnl’s 1x network & not on Bsnl’s evdo network.But,I have heared that other network cdma sims except Bsnl Evdo will work.If you can & if you have any cdma sims,pls check & reply about which cdma sims are working.I will buy Bsnl EVDO new sim if you confirm me that Bsnl EVDO sim is flawlessly connecting to Bsnl’s Evdo Network rather than Bsnl’s 1x Network.Also pls state the coverage support of this EC1561 & also if you have/using Bsnl evdo sim pls state how far you are staying from Bsnl’s Evdo Tower.

        If your EC1561 still fails to unlock after following the above steps then,pls reply back in English I will try my best to sort it out!

  5. sir i m trying to put SPC Code 000000 but error is coming “Phone does not eccept SPC. SPC is not correct. Phone may not respond during 10 seconds.
    pls help

  6. dear sir , when i uptade HUAWEI(Mts) EC1561 farmware ,My computer sutdown in between of operation ,so its dignostic port did not didicted by my pc . Farmaware updater also does not find deatail of it. Also MTS main dasbord not didicted . Please tell me about to solve my problem
    thank !

  7. Kamlesh Sir, i have experienced problem to decode SPC. when i click send button after clicking SPC button, the software respond ” Phone does not accept SPC. SPC is not correct.”. Plz solve my problem.

  8. hi,
    after unlocking how are we using another cdma network ??
    like i use tata photon ec 1561…. i havent unlocked it yet suppose if i unlock this and i want to use airtel cdma with this modem how do i do that…???
    i could not find a sim card slot in my ec1561 modem…. i opened and checked i cud only find a sd card slot…..

    kindly help me out…

  9. Hi Kamlesh
    to unlock the Huawei MTS EC1561 i gave data card to my friend, but i am not sure whether it is unlock or not.
    today i inserted the Reliance CDMA sim card, but it still not showing any network.
    can you please tell me how exactly we can check is data card unlock or not
    and after unlocking the data card what exact actions i need to perform to data card work.
    please let me know if i missed anything

    model: Huawei MTS EC1561

    MEID: A000002E3BFF89

  10. Hey kamlesh can you please tell me something about otlsl code?
    I get an error when i connect my huaweii ec1561.
    It asks for auto and manual activation and when iclick on manual activation it gives some esn number and asks for otksl code.

  11. hey ther is no , slot for sim card in it so how i am going to use another service providers service in my ec1561 modem ?

  12. Dear Kamalesh, Huawei E 1561 MEID: A0000033F0CC2D Please provide me the Firmware Updater Code. Regards, MANOJ V J

  13. Hi, my MEID is “A000002E0FE39A”. please provide with the firmware update password. this is a very good article and software. thanks in advance

  14. After unlocking EC1561 with cdma workshop, and changing to RUIM only, it is not getting changed to RUIM only, but always shows NV only.

    When i use original MTS Mblaze dashboard, it automatically changes to NV only
    SIM card not detected

  15. Finally i unlocked my mTS Mblaze EC1561 using cdma workshop. But when i detect the device in DC Unlocker client, It says LOCK STATUS: Locked (Card Lock)

  16. hello,

    could you please help me find the unlock code for the following MEID;-

    MEID – A0000059930E88
    model – tata photon max wifi – huawei ec315


Please enter your comment!
Please enter your name here