Unlock EC150 Huawei CMDA EVDO Modem Dongle Free

1850

Today, I am writing an article to Unlock EC150 Huawei 3G CMDA EVDO Modem Dongle  Various network providers provided CDMA 3G Modem Dongle to their users. The unlocking CDMA modem is difficult than GSM 3G / 4G modems. I have found some ways to Unlock EC150 Huawei 3G CMDA EVDO Modem Dongle for free. Interest users who have CDMA dongle can now contact me, and I will suggest some other steps which are not mentioned in the article. The below-provided solution will unlock your EC150 3G Huawei CMDA EVDO Modem Dongle fully. If you are interested, then you can try it out.

Step by step guide to Unlock EC150 Huawei 3G CMDA EVDO Modem Dongle Free

1. Download the EC150 modem dongle firmware which download link is provided at the end of the article.

2. Now, unzip and run the firmware update file.

CDMA modem firmware update
CDMA modem firmware update

3. Accept the agreement and click on the Next button to proceed.

4. On the following window, put a check on ‘Auto remove the device after the update’ and click Next.

Firmware Update - Auto remove
Firmware Update – Auto remove

5. Read the warning message and click on the Start button.

6. Now, it will ask you for a password.

Firmware update - password
Firmware update – password

7. Put the password of your MEID. (To get the firmware code of your MEID, comment your MEID).

8. Follow follow the online screen till the finish button.

Firmware Update - Finish
Firmware Update – Finish

9. Now, you have successfully finished the firmware update of your CDMA EVDO EC150 modem/dongle.

10. Now download the CDMA workshop tool 2.7 Pre-cracked version from the download link provided at the end of the article.

11. Now extract in a folder and run it.

12. Now, in the COM port drop-down list, select the COM port to which you have connected the EC150 modem. (To get the COM Port read this article.)

CDMA modem - COM port selection
CDMA modem – COM port selection

13. Now, after detecting the COM port, click on Connect, and your EC150 3G Huawei CMDA EVDO Modem Dongle will be connected to the CDMA Workshop 2.7.0 tool.

14. After the EC150 modem is connected, select the security tab and click the Read button.

CDMA modem - security tab
CDMA modem – security tab

15. When the SPC code is available in the box, click on the SPC button.

16. Now, you will get two options, Send and Write, as in the below screenshot. Click on the Send button, and you will get a message SPC accepted.

CDMA modem - SPC send
CDMA modem – SPC send

17. Now select the Other tab, and in the RUIM – select RUIM if available or to RUIM only and click on the write button. Now you have successfully unlocked your EC150 3G Huawei CMDA EVDO Modem Dongle.

CDMA modem - RUIM setting
CDMA modem – RUIM setting

Note: Now, you can use both CDMA inbuilt and another network provider CDMA SIM facility in your modem. If you select RUIM-only, then the default CDMA service will not work. If you select RUIM if available, you can use the default CDMA service without the SIM and another network provider CDMA  service when you insert the SIM into the EC150 3G Huawei CMDA EVDO Modem Dongle.

Users are requested to share the successful story to help each other.

I hope you have unlocked your EC150 3G Huawei CMDA EVDO Modem Dongle successfully, then like my Facebook Page.

Now download the latest Unbranded Huawei Mobile Partner Software from this link to use another network provider SIM on your unlocked EC150 CDMA modem.

Update: Reliance CDMA EC150 dongle asks for SPC code instead of firmware code.

 

Previous articleHow to Unlock Huawei B593?
Next articleCDMA modem or GSM modem is the best, What is the Difference?

Share your thoughts here!

This site uses Akismet to reduce spam. Learn how your comment data is processed.