Like Huawei modems, Micromax is also a brand for data-card. You can download Micromax MMX353G 3G USB Modem dashboard/software/drivers/connection manager and Micromax MMX 353G 3G USB modem driver/manager new version. The unlocking of the BSNL 3G Micromax MMX310G dongle is also possible totally free. You can also unlock the Aircel Micromax MMX352G data card free with a firmware upgrade.
Specifications of Micromax MMX353G 3G USB Modem :
Micromax MMX353G is a 3G dongle that supports HSDPA download speed up to 7.2 Mbps, and the upload speed limit is 5.76 Mbps. It is equipped with 128MB of ROM and 32 MB of RAM. The modem measures H:12mm x W:27 mm x L:89mm, and in weight, it is < 30 grams.
The MMX353G supports operating frequency bands 850/900/1800/1900/2100 MHz. It is a USB model and comes with a memory slot that can be upgraded up to 16GB. In software, it has SMS, Phonebook, and voice calling facility.
In an earlier version of Windows, from Win XP to 7, the device works fine. But, if you will use this data-card in Windows 8 or Windows 8.1, then you will find a compatibility issue. After installing the software, when you will plug the device, it will not get detected, and you will get the error “No Device found in Windows8/8.1”.
How to solve Micromax MMX353G USB Modem error: “No Device found in Windows8/8.1”?
1. Plug the Micromax data-card into the PC and open the Virtual CD drive.
2. Now, copy all files in a folder on your desktop or PC.
3. Now open the setup file (all the .exe files)–>right click–>properties–>compatibility–>enable ‘run this program in compatibility mode’–>select Windows 7.
4. Install the MMX353G software; it will show “Install Drivers…FAIL!” and promote you to Restart your PC.
5. Restart the Windows PC and ensure the MMX353G icon is in the desktop is in compatibility mode (already it should be in compatibility mode after installing).
6. Now go to the c:\program files(x86)\MMX353G 3G USB MANAGER\driverWin7_64
here you find the following files and do the following methods :
i) cmnsmdm–>right click->install—>ok
ii) cmnsser–>right click–>install–>ok
7. Now, run the software from the desktop icon.
8. It will start finding the network, and it will be available after a few seconds.
9. I Hope it will work fine for you.
