Download Firmware Huawei E8372h-608 Update 21.200.13.00.00 Universal
Download Firmware Huawei E8372h-608 Update 21.200.13.00.00 Universal
E8372h-608_Update_21.200.13.00.00_Universal.rar
25.3 MiB
920 Downloads
Details

Download Firmware Huawei E8372h-608 Update 21.200.13.00.00 Universal

Languages:English
Author:Kamlesh Kumar
Platforms:Windows 8
Category:Huawei
License:Freeware
Date:March 19, 2016

Disclaimer : Administration of routerunlock shall not be liable in case of unknowing change of the firmware of your modem / router / MiFi. Moreover, if you want any specific firmware of related to Huawei dongle / Pocket MiFi, then leave a comment, if it will be available then will be published. All the firmware which are posted at routerunlock, are free of cost and there is no need to pay anyone.

Huawei E8372

25 COMMENTS

  1. I want the password to unlock the firmware in order to flash my Huawei Modem E8372h – 608.
    IMEI: 866280025174864
    Thanks a lot ,Antoine

  2. I want the password to unlock the firmware in order to flash my Huawei Modem E8372h – 608.
    IMEI:866280025910168

    thanks
    Nico

  3. Hi
    I want the password to unlock the firmware in order to flash my Huawei Modem E8372h – 608.
    IMEI: 866280028255686
    Thanks
    Rick

  4. Mr Simlock
    Thanks for that firmware code. The firmware update was successful and when I ran the DC Unlocker 2 program, this time the modem was found and it showed details of its locked condition.
    The bad news is; I then bought credits to unlock the modem and put in my new username and password for DC Unlocker to confirm. All OK there, so I ran the unlocking procedure, which failed with the following message. “Unlocking, please wait …

    Waiting modem/phone to be ready …
    Error code 167

    unlock failed !”

    Then to make matters worse I now find after restarting DC Unlocker and trying to detect the modem Im back to this. “DC – Unlocker 2 Client 1.00.1396

    Detecting modem :

    selection :
    manufacturer – Huawei modems
    model – Auto detect (recommended)

    modem not found !”
    So please tell me I havent wasted my money and what is the solution now to fix this!!

  5. Mr Simlock
    A further update on the previously reported problem. My modem is no longer broad casting on the wireless network and the firmware updating program cant find the modems ports. So I hope your unlocker software hasnt just bricked my modem.

  6. Ok, everything has changed now. To cut a long story short. I found in device manager that the modem had showed up as a Huawei device with no drivers. I downloaded and installed drivers and the modem was broadcasting again. I ran DC Unlocker again and this time the unlock procedure was successful, as stated by the program. It told me the modem was unlocked. But this is a Telstra modem (Australias government run telecom if you are overseas) and the problem now is that the modem is unlocked, but still brings up a Telstra webpage when plugged into a windows PC, stating that I should insert a sim card and restart the modem. This happens with any sim card already inserted with or without current active data available. Do you know why this is happenning, is the modem still somehow locked to the Telstra network even though DC Unlocker says it is unlocked. Can this be fixed somehow?

LEAVE A REPLY

Please enter your comment!
Please enter your name here